Getting my car this week from South shores audo which will have my business in the future. At least I don't have to tow it in. If car not driven daily, battery will die on start. Clearing the codes doesn't change anything, it immediately throws them again when you start it up. This is has safety issues.
Turns out the evaporator holds condensation and turns to mold. Are your brake lights working? Off to search the interweb to see if I can find any issues. You can get at the bolts with different length socket extenders. Had to re-build the transmission twice due to leak of coolant into the transmission. I haven't had the problem since. Called the shop and he said it sounds like a wire shorting somewhere; offroad shakes the truck just right to cause the issue.
I have 2 small children and this is absolutely disturbing, I am really regretting not getting rid of this vehicle last year!! You'll need form a gasket blue or black or copper. Got a call from the shop yesterday afternoon; here are the results. Contents Copyright © 2019 LemonLaw. You may have to before you can post: click the register link above to proceed. If your wheel is somehow off by more than 15 degrees or so.
This site does not have any affiliation, recommend or make any representations, positive or negative, about the attorneys listed on this website or those to whom your inquiry is forwarded. I'm starting to think my H3 just doesn't like dirt. I know you didn't like my run away advice but you must be outside of your warranty window by now? You mention that the panel's not working either. Clearing the codes seems to allow it to start again, but immediately acts up and throws codes again. Most I've heard stop working. By the way some time it disappear and after that it show again.
. Have you pulled the panel off to check the wiring and led's? Some can get 4wd to work, some can't, some get it to reset, some don't. I got the same thing while at aturgis some 800 miles away from home. Then when you reconnect the battery it will have to do a relearn or drive cycle to set them again if it's that type of fault. Regional manager told me that they have to search for parts because my car is not the only one with this concern! If you have pushed your H3 to the point of drifting. It's interesting after reading the experts comment about this not happening with any other car, because I have the same exact dash lights on. Leakingsun roof censors, I was made to pay for that still dont work.
Have a new battery so I'm 99. Took it to dealer, problem could not be replicated. I remember telling you to try it the way I did in moab and you had no luck. I received the 1st letter about 6 months later , which I still haven't received a 2nd letter! Another strange thing, maybe related maybe not; sometimes when you try to start it, it keeps cranking even after you release the key back into the run position. I've heard of people doing the overnight thing, but I don't know if it really does any more good.
I beg that you all please look into these, before someone dies or anything else!! Now it will sometimes start, most times not start. Bud answered about a year ago Looking through the manual I noticed you can actually turn the Stability System off by it's button just above radio by pressing it for 5 seconds. This morning, it happened again. Please be sure to revew the at the bottom of the forum. Have had it to dealerships off and in for recalls but usually can figure things like this out in my own. I tryed several solutions that i read here in forum but none work: Reinserted plugs to the tccm module Chandged the battery with new one Changed the brake oil Cleaned the buttons from the traction panel they are not stuck New User Posts: 4 Joined: Mon Jul 21, 2014 8:48 am Vehicle: Hummer H3 Hello Petre is that your correct first name spelling? I still can't figure out how it wouldn't switch for you.
They fixed it in a few days, and I had to pay for a rental car. I replaced my engine hummer h3 two weeks ago due to a malfunctioning oil pump. It's also tied to the steering system. Many thanks, Suthinan New User Posts: 1 Joined: Thu Oct 09, 2014 3:11 am Vehicle: Hummer H3 I guess I would ask why the encoder motor if the control panel lights are not working as they should? Once vehicle is turned off it will show correctly. Maybe you can help me if its not to big of a trouble. There are not Hummer dealer in Thailand so it is very difficult to find the expert Technicial. It is weird how this happened immediately after changing the headlights.