Features such as automatic emergency brakes at low speed, 7 inch touchscreen display information, and a background camera is a standard Ali 2018 Yaris iA. Downshifting increases power going uphill, or provides engine braking downhill. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Always check local regulations before installing chains. If a child is accidentally locked in the luggage compartment, they could have heat exhaustion or other injuries.
Instrument cluster Eco Driving Indicator Light customization Vehicles with an auto- matic transmission Eco Driving Indicator Light can be activated or deactivated by press- ing the display change button when the Eco Driving Indicator Light customization display is displayed. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. Remove the light bulb When installing, reverse the steps listed. Illuminate dimmer than the headlights. Cruise control indicator will come Press the button again to deacti- vate the cruise control. .
When shifting the shift lever between P and D, make sure that the vehicle is completely stopped. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. Check that the shift lever is set in P automatic transmission or N manual transmission.
For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. ® Transfer the contact data to the system using a Bluetooth phone. Basic Operations Audio system Operations such as listening to audio, using the hands-free phone and changing multimedia system settings are started by using the following buttons. After installation, confirm that the lens is properly installed by gently pulling it.
Failure to do so may result in death or serious injury. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. Read more: iA Equally, cars use 1. Do-it-yourself maintenance Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
Do-it-yourself maintenance Attach fender liner retainer. After adjustment, pull the lever up to secure the steering wheel. When installing an accessory part to the back door, using a genuine Toyota part is recommended. Calculation formula for your vehicle. Doing so may result in loss of control and could cause an accident resulting in death or serious injury. Ensure the rubber cover is securely attached. Key without a wireless remote control function.
If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. Because this, objects will appear to be far- ther away than they actually are. The hatchback engine is Toyota-developed, while the sedans hail from Mazda. Although it is a reloaded version of the Mazda that has never touched American territory, the 2018 Toyota Yaris iA president is a bit impressive car. Push the lens into place. Fully extend the shoulder belt and allow it to retract to put it in lock mode. Failure to do so may result in death or serious injury.
Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. Push in each side of the glove box to disconnect the upper claws. Con- tact your Toyota dealer as soon as possible. Turn and secure the bulb. Child safety Run the seat belt through the child restraint system and insert the plate into the buckle. Do-it-yourself maintenance Remove the light bulb.